Zass ZAF 09 - User Manual

Questions and Answers

M
michelle42Aug 13, 2025
What to do if my Zass ZAF 09 Fryer food is not completely cooked?
- D
  Dr. Ronald KellyAug 13, 2025
  If your food isn't fully cooked in the Zass Fryer, it could be due to several reasons. The food pieces might be too large or thick; try placing smaller, thinner batches into the pot. The cooking time or temperature may be too low, so adjust accordingly. Also, ensure you're not overcrowding the pot; food should not exceed 4/5 of the pot's capacity, leaving space between ingredients. Lastly, make sure the food is completely defrosted before cooking.
D
Daniel WrightAug 17, 2025
Why is white smoke coming out of my Zass ZAF 09 Fryer?
- S
  Stacey CookAug 17, 2025
  White smoke from your Zass Fryer can occur for a couple of reasons. Some foods require constant turning during cooking; try pulling out the pot and turning the food every 5-8 minutes. Cooking greasy foods can cause oil to ooze, producing white smoke at high temperatures, which is normal. Also, residual oil from previous use can cause smoke, so ensure the pot is clean before each use.
R
Rebecca JohnsonAug 20, 2025
What to do if my Zass ZAF 09 display shows Error Code “E03”?
- J
  jamesmcclureAug 20, 2025
  If your Zass Fryer displays error code 'E03', it indicates that the furnace temperature is too high. Disconnect the power, pull out the pot, allow it to cool down, and then turn it on again.
D
Deborah RushAug 25, 2025
Why is my Zass ZAF 09 not working?
- W
  William MyersAug 25, 2025
  If your Zass Fryer isn't working, first ensure it's properly plugged into the socket. Also, check that the pot is correctly placed into the housing.
A
Amanda MoralesAug 28, 2025
How to make french fries crispy in Zass Fryer?
- R
  Renee MartinezAug 28, 2025
  The crispiness of french fries in your Zass Fryer depends on the water and oil content of the ingredients. Ensure the chips are dry before frying and avoid cutting them too thick. You can also preheat the pot before frying.
R
Roberto EdwardsSep 1, 2025
What to do if my Zass ZAF 09 Fryer display shows Error Code “E01”?
- J
  Julie LeonardSep 1, 2025
  If the display of your Zass Fryer shows the error code 'E01', it indicates an open circuit in the NTC sensor, which may be loose or disconnected. Please contact professional after-sales service ZASS.
M
Melissa McfarlandSep 5, 2025
What to do if my Zass Fryer display shows Error Code “E02”?
- C
  Casey AllenSep 5, 2025
  If your Zass Fryer displays error code 'E02', it means there is a short circuit in the NTC sensor, possibly due to damage. Please contact professional after-sales service ZASS.
C
Cheyenne PerezSep 8, 2025
Why is food cooked unevenly in my Zass ZAF 09 Fryer?
- J
  jeremy47Sep 9, 2025
  If food is cooking unevenly in your Zass Fryer, it may be because some items need to be turned over during cooking. To address this, pull out the pot and turn over the food every 5-8 minutes while cooking.

Zass ZAF 09 Specifications

General

Brand	Zass
Model	ZAF 09
Category	Fryer
Language	English

Zass ZAF 09 - User Manual

Table of Contents

Questions and Answers

Zass ZAF 09 Specifications