Zass ZWD 05WF User Manual (English)

Questions and Answers:

J
Joseph HunterAug 1, 2025
What to do if my Zass ZWD 05WF Water Dispenser is leaking?
- M
  Monica MosesAug 1, 2025
  If your Zass Water Dispenser is leaking, the silicone tube might be loose, the faucet could be defective, the filter or gasket might not be fitted correctly, the gasket might be deformed, or the water tank or pipe could be cracked. Try these solutions: * Attach the silicone tube. * Change the faucet. * Reinstall the filter or gasket. * Replace the sealing gasket. * Replace the water tank. * Replace the water pipe.
C
Candice NicholsAug 6, 2025
Why is my Zass Water Dispenser not heating water?
- G
  gcortezAug 6, 2025
  If your Zass Water Dispenser isn't heating water, it could be due to a defective or disconnected switch, a defective heating resistor, or imperfect electrical connections. You can try: * Replacing the switch and checking the connections. * Replacing the hot water tank containing the heating resistor. * Repairing the electrical connections.
S
Shane CarrollAug 10, 2025
How to fix Zass Water Dispenser LEDs not lighting up?
- E
  edwardblakeAug 10, 2025
  If the LEDs on your Zass Water Dispenser aren't lighting up, it could be because the appliance isn't connected to the mains or the switch isn't turned on. To resolve this: 1. Check that the plug is properly inserted into the electrical outlet and that the switch is turned on. 2. Ensure the switch is in the 'on' position.
C
Curtis Johnson DVMAug 14, 2025
What to do if my Zass Water Dispenser doesn't cool water?
- A
  Anthony SheltonAug 14, 2025
  If your Zass Water Dispenser is not cooling water, it might be due to a defective or disconnected switch, or imperfect electrical connections. Try replacing the switch and checking the connections, or repairing the electrical connections.
B
Bonnie ThorntonAug 18, 2025
Why is there no tap water coming from my Zass ZWD 05WF?
- J
  Jamie WalkerAug 18, 2025
  If there's no tap water coming from your Zass Water Dispenser, it could be due to a clogged filter or a bent/sealed pipe. Try replacing the filter or removing/straightening the bent pipe.