Basic Operation
■ Power On/Off of the Vehicle Mounted Station
Power Key
◇ Power On of the Vehicle Mounted Station
Under the shutdown state, press the key for a second to turn on the walkie-talkie.
After the walkie-talkie begins to beep loudly and there appear some messages on the LCD
display screen, directions and the present operating frequency will show on the screen.
◇ Power Off of the Vehicle Mounted Station
Under the shutdown state, press the key for a second to turn off the walkie-talkie.
As the walkie-talkie is turned off, the present parameters can be stored in it and will be shown
autimatically for the next time when the power is on again.
■ Volume Control
Minimum Max Minimum Max
Volume Volume Volume Volume
■ Adjust the Frequency with the Tuning Knob
Under the VFO mode, adjust and select the frequency that needs to be adjusted with the
[DIAL] knob. Clockwise adjustment is to increase the frequency, and the anticlockwise
adjusstment is to decrease the frequency. One notch can increase or decrease it by one step
value.
To Next Page
Loading...