zBoost Metro YX540 - User Manual

zBoost Metro YX540
User Guide
30 day money back guarantee when you buy directly from Wi-Ex. If product is
purchased from a reseller or third party, you must use their return policy.
1 Year Manufacutrer Warranty
Register your zBoost product at www.Wi-Ex.com
v.081310

Summary

About zBoost from Wi-Ex

FCC Information

FCC ID and compliance details for the zBoost Metro YX540 device.

Industry Canada Regulations

Canadian regulatory compliance and certification for the zBoost Metro YX540.

Safety and Product Warranty Information

Safety Guidelines

Guidelines for safe operation and RF exposure compliance.

Preparing to Set Up Your zBoost Product

Check for Signal Strength

How to test for adequate outdoor signal strength before installation.

Setting Up Your zBoost Signal Booster

Place the Signal Antenna on the interior of a window located in the area of best signal

Positioning the signal antenna for optimal reception at a window.

Place the zBoost Base Unit where you want to create a Cell Zone

Positioning the zBoost Base Unit to establish the indoor coverage area.

Run the provided coaxial cable between the Base Unit and Signal Antenna

Connecting the Signal Antenna to the Base Unit using the coaxial cable.

Connect the zBoost Base Unit to the provided power supply and plug into a power outlet

Connecting the Base Unit to power and plugging it into an outlet.

Confirm That Your zBoost is Working Properly

zBoost Base Unit Light Indicators

Improving Your Coverage Area

Warranty Information

Limited 1 Year Warranty

Details of the one-year limited warranty for Wi-Ex products.

Before requesting repair service...

Troubleshooting Solid Red Light

To get warranty service...

Obtaining Warranty Service

zBoost Metro YX540 Specifications

General

Coverage Area	up to 1, 500 sq ft
Impedance	50 ohms
Type	Cellular Signal Booster
Power Supply	AC Adapter
VSWR	≤ 2.0:1