12
IMPORTANT SAFETY INFORMATION PLEASE READ CAREFULLY
Scuba products are subject to conditions of extreme wear and
corrosion. Inspection and maintenance are required to ensure continued
performance. Zeagle requires that you have your regulator inspected
and serviced once a year on the anniversary date of its purchase at any
authorized Zeagle dealer worldwide. Zeagle Scuba equipment should be
used by certified Scuba divers only.
Zeagle regulators are manufactured using materials suitable for use with EAN
(i.e., Nitrox, etc.) providing the oxygen content does not exceed 40%. The
regulator must be kept “Oxygen Clean” and used only with EAN mixtures to
maintain this status. Once the regulator is used with air not certified to be
clean for enriched air use, the regulator will have to be cleaned again for EAN
use by a certified technician.
SAFETY INFORMATION
Read these instructions carefully before using your regulator. Keep this
manual for future reference. Following the care and maintenance section at
the end of this booklet will help ensure reliable service.
WARNING
To Next Page
Loading...
Need help?
General
