12 ET5X Enterprise Tablet
Reading NFC Cards And RFID Tags
The ET5X supports reading NFC cards and RFID tags. The NFC antenna is located on the back of the
device under the NFC logo.
With an NFC enabled application open, bring the NFC card toward the antenna. Depending upon the
application, an audio or visual indication indicates successful reading of the card.
Regulatory Information
This guide applies to the following Model Numbers: ET50NE, ET50NT, ET55AE, ET55AT, ET55RE
and ET55RT.
All Zebra devices are designed to be compliant with rules and regulations in locations they are sold
and will be labeled as required.
Local language translations are available at the following website: http://www.zebra.com/support.
Any changes or modifications to Zebra equipment, not expressly approved by Zebra, could void the
user's authority to operate the equipment.
Declared maximum operating temperature: +50 °C.
UL Listed Products with GPS
Underwriters Laboratories Inc. (UL) has not tested the performance or reliability of the Global
Positioning System (GPS) hardware, operating software or other aspects of this product. UL has only
tested for fire, shock or casualties as outlined in UL's Standard(s) for Safety for Information Technology
Equipment, UL60950-1. UL Certification does not cover the performance or reliability of the GPS
hardware and GPS operating software. UL MAKES NO REPRESENTATIONS, WARRANTIES OR
CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY
GPS RELATED FUNCTIONS OF THIS PRODUCT.
Radio Modules
The device contain approved radio module(s). These module(s) are identified below.
For models:
CAUTION Only use approved and UL Listed accessories, battery packs and battery chargers.
Do NOT attempt to charge damp/wet mobile computers or batteries. All components
must be dry before connecting to an external power source.
NFC Antenna
Location
To Next Page
Loading...
