TC56/TC57 Vehicle Cradle Installation Guide
16
Care and Cleaning
Avoid getting oils, grease or gasoline on the vehicle cradle, and do not let debris
gather in the bottom of the vehicle cradle slot. When necessary, clean the vehicle
cradle with a mild cleaner. Ensure any cleaner used is approved before using by
contacting Zebra for advice.
Troubleshooting
Fast Blinking Amber (2
blinks/second)
Charging error, e.g.:
• Termperature is too low or too high.
• Charging has gone on too long without
completion (typically eight hours).
Fast Blinking Red (2
blinks/second)
Charging error but the battery is at end of useful
life., e.g.:
• Termperature is too low or too high.
• Charging has gone on too long without
completion (typically eight hours).
Symptom Possible Cause Action
TC56/TC57
charging LED
does not light
up.
Vehicle cradle is
not receiving
power.
Ensure the TC56/TC57 is inserted
correctly in the vehicle cradle or
connected to a power source.
LED Indication
To Next Page
Loading...
