TC56/TC57 Vehicle Cradle Installation Guide
5
Figure 3 Inside View
CAUTION: ROAD SAFETY - Do not operate the TC56/TC57 while the vehicle is in motion.
Park the vehicle first. Always ensure the TC56/TC57 is fully inserted into the cradle. Do
not place it on the seat or where it can break loose in a collision or sudden stop. Lack of
proper insertion may result in property damage or personal injury. Zebra is not responsi-
ble for any loss resulting from the use of the products while driving. Remember: Safety
comes first.
Mounting the Vehicle Cradle to a RAM
Mount
To mount the vehicle cradle to a RAM Mount:
CAUTION: Only mount the vehicle cradle in a vertical position. Never mount the vehicle
cradle on the side or upside down or on a wall that can be subject to impact or collision
of greater than 10Gs, in accordance with SAE J1455 Section 4.10.3.5.
1.
Follow the instructions that are provided with the RAM Mount for RAM Mount
mounting instructions.
2. Align the back of the vehicle cradle with the RAM Mount diamond plate.
To Next Page
Loading...
