ZEBRA CONFIDENTIAL: INTERNAL USE ONLY ZEBRA TECHNOLOGIES 1
VC80 Windows 7/10
Driver Installation Guide
Required drivers:
1. Intel Chipset driver: (file name- SetupChipset_10.1.1.34.exe)
For Windows 10 only
a. Reboot VC80;
b. Open Device Manager -> System Devices;
c. In System Devices, update I2C driver to “I2C Controller” using Update Driver Software,
pick up “I2C Controller” driver from the list of compatible hardware;
2. Intel HD Graphics driver: (Driver version is identified as 10.18.10.4358); (file name – Setup.exe
in Graphics_15.33.42.64.4358.zip)
a. Reboot VC80;
3. Intel TXE driver rev. (driver version is identified as 1.0.0.1064); (file name -
SetupTXE_2.0.22.0.exe)
a. Unattended installation: “setuptxe -s”;
4. Intel IO drivers (I2C, HSUART, SPI and GPIO drivers rev.1.1.1.1004);
file name –
• Windows 7 - Intel_Atom_E3800_Processor_Windows7_IO_Drivers.msi
• Windows 10 - Installed individually as INF files in this ZIP file -
Intel_Atom_E3800_Processor_Windows10_IO_Drivers.zip
5. Touch Base UPDD driver rev. 05.01.1930: (file name-
TouchScreen_Driver_Windows_7_10_Setup64_05.01.1430.exe)
a. Select “AR1100 USB” from device list during installation;
b. Start Configuration application and configure UPDD for Interactive touch, 16-point
calibration;
c. Calibrate touch panel;
d. Reboot VC80
6. Realtek VC80 Audio driver rev. 6.0.1.7329_PG398;
(file name Setup.exe in
Zebra_VC80_Realtek_Audio_Driver_Windows_7_10_v6.0.1.7329_PG398.zip >
7329_PG398_VISTA folder)
*** Installation of the driver requires 2 reboots. The Setup file will prompt for these reboots.
7. Broadcom Bluetooth driver (Broadcom BT Driver + WidComm BT Stack package);
Setup.exe in:
• Bluetooth_Zebra_VC80_Win7_6.5.1.6930.zip
• Bluetooth_Zebra_VC80_Win10_12.0.1.940.zip
To Next Page
