Zebra Z4M - Page 29

77259L Rev. 4 12/16/03 Z4M/Z6M Maintenance Manual Page 2-3
2SHUDWLRQV2YHUYLHZ 6HFWLRQ
)URQW3DQHO.H\V
Key Function
Forces the printer to feed one blank label each time the key is pressed.
• Printer not printing: one blank label immediately feeds.
• Printing: one blank label feeds after the current batch of labels is complete.
Note • Equivalent to the Slew to Home Position (~PH, ^PH) ZPL II instruction.
Stops and starts the printing process.
Printer not printing: no printing can occur.
Printing: printing stops once the current label is complete.
Press to remove error messages from the display.
Note • Pause Mode can also be activated via ZPL II (~PP, ^PP).
In pause mode cancels print jobs.
Printer not printing: the next stored label format is canceled.
Printing: the label format currently printing is canceled.
Press and hold for several seconds to cancel all print jobs in the printer’s memory.
Enters and exits the configuration mode.
Toggles increment (+) and decrement (-) between scroll and change.
Press once to increment (+) and decrement (-) value of the selection.
Press again to increment (+) and decrement (-) to scroll through the menu items.
Scroll Mode
Scrolls to the next selection.
Change Mode
Increases value.<
Answers yes.<
Prints a label (when applicable).
PAUSE