Need help?Do you have a question about the Zebra Z4Mplus and is the answer not in the manual?
General| Print Method | Thermal transfer or direct thermal |
|---|---|
| Resolution | 203 dpi |
| Max Print Width | 4.09 inches |
| Max Print Length | 39 inches |
| Max Print Speed | 10 inches per second |
| Memory | 4 MB Flash, 8 MB DRAM |
| Interface | Parallel, Serial |
| Media Sensors | Reflective and transmissive |
| Media Width | 0.79 inches to 4.5 inches |
| Media Length | 0.38" (9.6 mm) to 39" (991 mm) |
| Ribbon Width | 2 inches to 4.33 inches |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Operating Temperature | 40°F to 105°F |
| Storage Temperature | -40 to 140°F (-40 to 60°C) |
| Humidity | 20 to 85% non-condensing |
Details on product enhancements and updates.
Details warranty terms for printer hardware components.
Details warranty terms for consumable supplies.
Information on how to contact Zebra Technologies for support.
Overview of the manual's chapters and content.
Explanation of symbols, formatting, and conventions used.
Instructions for checking the printer for damage upon arrival.
General overview of printer controls and components.
Details the front panel keys and lights.
Illustrates the different parts of the printer's side view.
Preparation steps before setting up the printer.
Description of approved media types for the printers.
Explanation of different printer operational modes.
Instructions for loading media and ribbon into the printer.
Procedure for calibrating the printer for accurate printing.
Guidance on adjusting printhead pressure for optimal print quality.
How to print a configuration label to test printer setup.
Steps to resolve common printing issues and errors.
Overview of printer configuration settings and their meanings.
Instructions for correctly positioning the media sensor.
Factors to consider for printer communication setup.
Specifications and requirements for printer data cables.
Basics of printer controls and media loading.
Description of the function of each key on the printer's front panel.
Explanation of the status and indications of the front panel lights.
Step-by-step guide for loading roll media in various modes.
Instructions for loading fanfold media into the printer.
Procedure for accessing the printer's setup menu.
How to modify settings protected by a password.
Detailed guide to configuring printer settings and calibration.
Procedure to reset and adjust media and ribbon sensor sensitivity.
Recommended cleaning schedule and methods for printer parts.
Instructions for cleaning the printhead and platen roller for optimal performance.
Steps for cleaning the printer's media and ribbon sensors.
Procedure for safely replacing the printer's AC power fuse.
List of error messages, their causes, and solutions.
Common issues affecting print quality and how to resolve them.
Troubleshooting steps when auto-calibration fails.
Information on performing self-tests for printer diagnostics.
Physical and electrical specifications for Z4Mplus and Z6Mplus printers.
Details on print resolution, speed, and dimensions.
Requirements and dimensions for compatible media types.
List of available optional features for the printers.
Technical details on serial data communications and signals.
Diagrams and notes for RS-232 cable connections.
Information on the 8-bit parallel data interface and IEEE 1284 compatibility.
Pin configuration for a standard computer-to-printer parallel cable.
Instructions for installing a PCMCIA card into the printer.
Procedures for regular maintenance to extend printhead life.
Using cleaning film to remove contamination and extend printhead life.
Information on ordering cleaning film kits based on printer width.
To Next Page