To Next PageTo Next Page
Need help?Do you have a question about the Zebra ZT400 and is the answer not in the manual?
General| Print Method | Thermal Transfer and Direct Thermal |
|---|---|
| Supported Media Types | Continuous, Die-cut, Notch, Black-mark |
| Print Width | 104 mm (4.09 in) |
| Print Resolution | 203 dpi/8 dots per mm, 300 dpi/12 dots per mm optional |
| Max Print Speed | 356 mm per second (14 ips) |
| Memory | 512 MB Flash |
| Connectivity | USB 2.0, RS-232 Serial, 10/100 Ethernet, Bluetooth |
| Media Sensors | Reflective, Transmissive |
| Operating Temperature | 0° to 40° C (32° to 104° F) |
| Media Width | 19.4 mm to 114 mm (0.75 in to 4.5 in) |
| Media Length | 991 mm (39 in) |
| Ribbon Length | 450 m |
| Storage Temperature | -40º F to 140º F/-40º C to 60º C |
| Weight | 16.33 kg (36 lbs) |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Ribbon Width | 51 mm to 110 mm (2.00 in to 4.33 in) |
Instructions for removing used ribbon from the ribbon take-up spindle.
