Zebra ZT400 User Manual

Control Panel
2
P1060608-003 ZT400™ Series Quick Reference Guide 4/8/14
Control Panel
The control panel (Figure 2) indicates the printer’s current status and allows the user to control
basic printer operation.
6
13
12
9
8
11
10
1 2 3 4 5
14 15 16
Figure 2 • Control Panel
7
1
STATUS light These indicator lights
show the current status
of the printer. For more
information, refer to the
User Guide.
2
PAUSE light
3
DATA light
4
SUPPLIES light
5
NETWORK light
6
The display shows the printer’s current status and
allows the user to navigate the menu system.
7
RIGHT SELECT
button
These buttons execute
the commands shown
directly above them in
the display.
8
LEFT SELECT button
9
The UP ARROW button changes the parameter
values. Common uses are to increase a value or to
scroll through choices.
10
The OK button selects or confirms what is shown
on the display.
11
The LEFT ARROW button, which is active only
in the menu system, navigates to the left.
12
The RIGHT ARROW button, which is active only
in the menu system, navigates to the right.
13
The DOWN ARROW button changes the
parameter values. Common uses are to decrease a
value or to scroll through choices.
14
The PAUSE button starts or stops printer operation
when pressed.
15
The FEED button forces the printer to feed one
blank label each time the button is pressed.
16
The CANCEL button cancels label formats when
the printer is paused.
• Press once to cancel the next label format.
• Press and hold for 2 seconds to cancel all label
formats.

Zebra ZT400 Specifications

General

Print Method	Thermal Transfer and Direct Thermal
Supported Media Types	Continuous, Die-cut, Notch, Black-mark
Print Width	104 mm (4.09 in)
Print Resolution	203 dpi/8 dots per mm, 300 dpi/12 dots per mm optional
Max Print Speed	356 mm per second (14 ips)
Memory	512 MB Flash
Connectivity	USB 2.0, RS-232 Serial, 10/100 Ethernet, Bluetooth
Media Sensors	Reflective, Transmissive
Operating Temperature	0° to 40° C (32° to 104° F)
Media Width	19.4 mm to 114 mm (0.75 in to 4.5 in)
Media Length	991 mm (39 in)
Ribbon Length	450 m
Storage Temperature	-40º F to 140º F/-40º C to 60º C
Weight	16.33 kg (36 lbs)
Power Requirements	100-240 VAC, 50/60 Hz
Ribbon Width	51 mm to 110 mm (2.00 in to 4.33 in)