Need help?Do you have a question about the Zebra Silverline ZT410 and is the answer not in the manual?
General| Print Method | Thermal transfer and direct thermal |
|---|---|
| Resolution | 203 dpi (8 dots/mm), 300 dpi (12 dots/mm) |
| Max Print Width | 4.09 in./104 mm |
| Max Print Speed | 14 ips (356 mm/s) |
| Connectivity | USB, Serial, Ethernet, Bluetooth, Wireless |
| Media Sensors | Reflective, Transmissive |
| Optional Communication | Wireless LAN (802.11 a/b/g/n) |
| Maximum Media Width | 4.49 in. (114 mm) |
| Media Roll Diameter | 8.0 in./203 mm O.D. on a 3 in./76 mm I.D. core |
| Operating Temperature | -40°C to 40°C |
| Storage Temperature | -40º F to 140º F/-40º C to 60º C |
| Power Requirements | 100-240 VAC, 50/60 Hz |
Details FCC and Canadian compliance statements for the printer, including operational conditions and exposure limits.
Identifies the intended audience for the user guide, covering routine maintenance, upgrade, and troubleshooting.
Explains the structure and organization of the user guide, outlining its sections and their purposes.
Details the physical parts and components of the printer, including color coding and key features.
Describes the various ports and connectors for printer communication, such as Ethernet, Serial, and USB.
Provides information and recommendations for using data cables with the printer, including shielding and noise reduction.
Explains the layout and functions of the printer's control panel buttons and display for operation.
Guides users on how to navigate menus and screens using the control panel buttons and display.
Describes the different display states and menu structures of the printer's interface for operation.
Provides an overview of the media types compatible with the printer and their characteristics.
Introduces the ribbon types and their usage for thermal transfer printing.
Guides on determining when ribbon is necessary for printing operations.
Specifies the correct orientation of the ribbon's coated side for printing.
Provides instructions on how to safely handle the printer during unpacking, storage, and shipping.
Guides users on unpacking and checking the printer for any shipping damage.
Details the recommended conditions for storing the printer when not in use.
Outlines the steps and precautions for safely shipping the printer.
Advises on choosing a suitable environment and location for printer installation.
Guides on installing necessary software and connecting the printer to a computer via various interfaces.
Provides steps to download and install the Zebra Setup Utilities software for printer management.
Details the process of connecting the printer to a computer using a USB port.
Guides on establishing a connection between the printer and computer via serial or parallel ports.
Explains how to connect the printer to a network using its Ethernet port.
Provides instructions for connecting the printer to a wireless network.
Details how to adjust the media sensor and ribbon strip plate for proper media handling.
Guides on adjusting printer settings specifically for Silverline media compatibility.
Explains the procedure for loading media and performing printer calibration.
Step-by-step guide for correctly loading Silverline media into the printer.
Step-by-step guide for correctly loading ribbon into the printer for thermal transfer.
Provides examples of label formats for Silverline media, including ZPL code.
Example label format for the CLASSIC media type.
Example label format for the SLIM media type.
Example label format for the MICRO media type.
Introduces the printer settings that can be modified and the tools used for adjustment.
Details settings related to print darkness, speed, media type, and print method.
Explains various tools and diagnostic functions available through the printer's menus.
Covers configuration of network parameters like IP address, subnet mask, and gateway.
Details settings specific to the printer's RFID capabilities, including calibration and tag operations.
Allows changing the printer's display language and ZPL command behavior.
Covers configuration and adjustment of media and label sensors for optimal performance.
Explains settings related to serial and data communication ports, such as baud rate and parity.
Details how to configure and manage the printer's Bluetooth connectivity.
Provides instructions for calibrating sensors to ensure accurate media and ribbon detection.
Guides on adjusting printhead pressure for optimal print quality and media handling.
Instructions for safely removing used ribbon from the take-up spindle.
Outlines a schedule and methods for routine printer cleaning to maintain performance.
Instructions for cleaning external surfaces, internal compartments, and sensors.
Detailed steps for cleaning the critical printhead and platen roller components.
Information on when and how to replace worn printer components like the printhead.
Guidance on how to obtain replacement parts, including specific part numbers.
Information on responsible disposal and recycling of printer components.
States that no lubrication is required for the printer.
Explains the status indicated by the printer's control panel lights.
Identifies common printing problems, their causes, and recommended solutions.
Details issues related to ribbon usage, causes, and troubleshooting steps.
Covers problems specific to RFID functionality, including causes and solutions.
Lists printer error messages, their possible causes, and recommended solutions.
Addresses issues related to data communication between the printer and computer.
Covers various other issues not categorized elsewhere, with their solutions.
Introduces diagnostic tools and self-tests for assessing printer condition.
Explains the automatic test performed when the printer powers on.
Describes a self-test that prints configuration and network labels.
Details a self-test for mechanical assembly checks and printhead element diagnostics.
A test to determine optimal darkness and print speed settings for various media.
A self-test that resets printer configuration to factory defaults.
A self-test that resets network configuration to factory defaults.
A tool to check communication between printer and host computer by printing received data.
A diagnostic tool to analyze sensor performance and media gap detection.
Lists the necessary hardware and software for completing the exercises.
Identifies and describes the sample files needed for the exercises.
Introduces the functionality and usage of the printer's USB host port.
Exercise on transferring files and performing USB mirroring operations.
Exercise on printing label formats directly from a USB flash drive.
Exercise demonstrating copying files between a USB drive and printer memory.
Exercise using a USB keyboard to input data and print labels from stored files.
Introduces the printer's NFC capability for device pairing and data transfer.
Exercise using a smart device for data input and label printing via NFC.
Lists detailed specifications for supported RFID media used with the printer.
Details the technical specifications related to the printer's printing capabilities.
Provides technical specifications for recommended ribbons compatible with the printer.
Outlines general physical and electrical specifications for the printer.
Details requirements and guidelines for using appropriate power cords with the printer.
To Next Page
