Printer Configuration and Adjustment
Adjust Printer Settings
76
P1089083-001 ZT410 RFID Printer for Silverline Media User Guide 10/7/16
Adjust Printer Settings
This section presents the printer settings that you can change and identifies the tools for
changing them. These tools include the following:
• ZPL and Set/Get/Do (SGD) commands (See the Zebra
®
Programming Guide for more
information.)
• The printer’s user menus (See Idle Display, Home Menu, and User Menus on page 18 for
more information.)
• The printer’s web pages when the printer has an active wired or wireless print server
connection (See the ZebraNet Wired and Wireless Print Servers User Guide for more
information.)
Copies of the referenced manuals are available at http://www.zebra.com/manuals.
This section contains the following subsections:
• Print Settings on page 77
• Tool Settings on page 84
• Network Settings on page 97
• RFID Settings on page 104
• Language Settings on page 110
• Sensor Settings on page 114
• Port Settings on page 116
• Bluetooth Settings on page 119
To Next Page
Loading...