Need help?Do you have a question about the Zebra 2844 and is the answer not in the manual?
General| Resolution | 203 dpi |
|---|---|
| Print Width | 4.09 inches (104 mm) |
| Maximum Print Length | 39 inches (991 mm) |
| Print Speed | 4" (102 mm) per second |
| Interface | Serial, Parallel, USB |
| Media Sensors | Reflective and Transmissive |
| Power Requirements | 100-240 VAC, 50-60 Hz |
| Storage Temperature | -40° F (-40° C) to 140° F (60° C) |
| Print Method | Direct Thermal |
| Operating Temperature | 41°F to 104°F (5°C to 40°C) |
Provides instructions for unpacking the printer and its accessories.
Identifies key components and features of the printer.
Details the steps for physically installing the printer and its power supply.
Explains the procedure for calibrating the printer's media gap sensing.
Guides users through the process of installing the printer software.
Offers initial information on using the printer's basic functions.
Instructions for preparing and using thermal transfer ribbons with the printer.
Details how to set up and use the optional label dispenser feature.
Explains the procedure for loading and using fan-fold media.
Describes the operation and specifications of the optional media cutter.
Explains printer status by interpreting indicator light patterns.
Provides solutions for common issues encountered during printer operation.
Addresses problems related to media loading, feeding, and cutting.
Details the pin assignments for connecting the printer via a serial interface.
Details the pin assignments for connecting the printer via a parallel interface.
Provides contact assignments and electrical values for USB connections.
Instructions on how to clean the printer's print head for optimal performance.
Guidance on cleaning the printer's platen roller.
Steps to prepare media rolls and labels before loading into the printer.
To Next Page
