Preparing Media,
Paper, and Labels
Before Loading
During shipment, the outside length of media
may become dirty when handled or dusty when
stored. A preparation before loading media
makes sure both the print head and platen stay
cleaner for more time.
You must avoid dragging adhesive or dirty
media between the print head and platen. Such
an occurance damages the print head and is not
covered under your warranty.
980348-001 Rev. A 31
Appendix A - Troubleshooting
Label Rolls
Find the tape and
pull off both labels
held by the tape
Tag Stock Rolls
Find the tape
and detach the
bottom tag
MOVIE
To Next Page
Loading...