Need help?Do you have a question about the Zebra 2844-Z and is the answer not in the manual?
General| Resolution | 203 dpi (8 dots/mm) |
|---|---|
| Print Method | Direct Thermal |
| Print Width | 4.09 inches (104 mm) |
| Maximum Print Length | 39 inches (991 mm) |
| Print Speed | 4 inches per second (102 mm/s) |
| Memory | 8 MB SDRAM |
| Connectivity | Serial, Parallel, USB |
| Media Sensors | Reflective and Transmissive |
| Interface | RS-232, Parallel, USB, Ethernet (optional) |
| Power Requirements | 100-240 VAC, 50/60 Hz |
Greeting and overview of the printer.
Lists the items included with the printer.
Instructions for checking the printer's parts.
Procedure for opening the printer cover.
Procedure for closing the printer cover.
Describes different printing modes available for the printer.
Steps for connecting the power supply to the printer.
Instructions for loading media rolls into the printer.
Detailed steps for placing a media roll.
How to adjust media guides for proper media alignment.
Steps for installing the ribbon supply roll.
Steps for installing the ribbon take-up core.
Function of the power switch.
Function of the feed button.
Meaning of the status light indicators.
Specifications for required interface cables.
How USB communication works.
How parallel communication works.
How ZebraNet communication works.
How serial communication works.
Explains the thermal printing process and precautions.
Steps for adding a new ribbon roll.
How to replace a partially used ribbon.
Procedures and supplies for cleaning the printer.
Steps to remove the platen from the printer.
Steps to reassemble the platen into the printer.
Procedure for replacing the print head on the LP model.
Steps to reassemble the print head for the LP model.
Explains the meaning of the status LED indicators.
Provides solutions to common printer issues.
Troubleshooting steps for power issues.
What to do when the printer is on but idle.
Troubleshooting steps for POST failures.
Troubleshooting steps for memory errors.
Printer behavior when receiving data.
Troubleshooting steps for media or ribbon out errors.
Troubleshooting steps for an open print head.
How to resume a paused printer.
Addresses issues related to label print quality and missing print.
Steps to resolve issues with no print on the label.
Troubleshooting steps for incorrect printed images.
Resolving issues with missing print lines.
Troubleshooting ribbon sensor issues.
Procedures for manual calibration.
Performing tests to diagnose printer issues.
How to print the printer's configuration.
When and how to recalibrate the printer.
Steps for resetting printer to factory defaults.
Steps to diagnose communication problems.
Technical specifications of the printer models.
Dimensions and weight of the printers.
Operating and storage environmental conditions.
Details on print density, speed, width, and length.
Pinout and wiring for USB interface.
To Next Page
