Need help?Do you have a question about the Zebra GX430t and is the answer not in the manual?
General| Maximum resolution | 300 x 300 DPI |
|---|---|
| Standard interfaces | RS-232, USB 1.1 |
| Optional connectivity | Bluetooth |
| Internal memory | 4 MB |
| Number of fonts | 22 |
| Dimensions (WxDxH) | 194 x 254 x 191 mm |
| Minimum RAM | 8 MB |
| Maximum label width | 108 mm |
| Maximum label length | 1 m |
| Product color | Black |
| Power requirements | 100-240 VAC, 50-60 Hz |
Weight and Dimensions| Depth | 254 mm |
|---|---|
| Width | 194 mm |
| Height | 191 mm |
| Weight | 2100 g |
XiVE Select Try-In Implants for verifying implant position, axis, and relation to bone crest.
Posterior, Anterior, and Crestal twist drills for implant placement.
Kit containing depth stops for XiVE Twist Drills.
Depth stops for XiVE Posterior and Anterior drills.
Taps for pre-tapping implant sites in dense bone.
Gingiva Formers for soft tissue contouring.
Lab set for transfer impressions.
Lab set for PickUp impressions.
Transfer copings for transfer and pickup impression techniques.
Select Try-In Abutments for determining gingival height and angle.
EstheticBase Abutments for single crowns and bridges.
FRIADENT MP Abutments for bar-supported overdentures.
Set of instruments for prosthetic delivery.
Sterile XiVE TG transgingival screw implants.
Expert set for XiVE TG implant placement.
To Next Page
