Need help?Do you have a question about the Zebra GK888t and is the answer not in the manual?
General| Print Method | Thermal Transfer and Direct Thermal |
|---|---|
| Resolution | 203 dpi (8 dots/mm) |
| Maximum Print Width | 4.09 inches (104 mm) |
| Memory | 8 MB Flash |
| Connectivity | USB, Serial, Parallel |
| Media Sensors | Reflective and transmissive |
| Media Handling | Roll-to-roll, fanfold, tag stock |
| Media Types | tag stock |
| Ribbon Ratio | 1:1 |
| Programming Languages | EPL2, ZPL |
| Power Requirements | 2.5A |
| Storage Temperature | -40° F to 140° F/-40° C to 60° C |
| Humidity | 20 to 85% non-condensing |
Provides contact information for technical support, repair, training, and sales departments.
Explains the formatting, icons, and conventions used throughout the user guide for clarity.
Overview of the Zebra GK888t™ printer, its features, programming languages, and options.
Lists the items included in the printer's shipping box for initial setup verification.
Details the printer's physical controls like the power switch and feed button for basic operation.
Step-by-step guide on how to connect the printer's power supply and cord to an electrical outlet.
Instructions on how to properly prepare and load a roll of media into the printer's media compartment.
Information on connecting the printer to a computer using various interface options like USB, Serial, and Ethernet.
Explains the different printing modes supported by the printer, such as direct thermal and thermal transfer.
Describes various types of media compatible with the printer, including standard, continuous, and linerless labels.
Guidance on how to replace consumables like labels and transfer ribbons when they run out during printing.
Details the functionality and setup of the optional label dispenser for peeling and presenting labels.
Information about the optional media cutter, its capabilities, and how to load media with it.
Describes the ZBI 2.0 optional programming language for enhancing printer functionality and automation.
Instructions on how to clean the printer's printhead using a cleaning pen to ensure print quality.
Steps for cleaning or replacing the printer's platen (drive roller) to maintain performance and prevent jams.
Detailed procedure for safely removing and installing a new printhead, including necessary precautions.
Provides resolutions for various printer error conditions indicated by the status light.
Addresses common issues affecting print quality, such as smudges, blank lines, or incorrect images.
Explains different printer modes accessible via the Feed button for configuration and diagnostics.
Details the USB interface wiring and requirements for connecting the printer to a computer.
Provides pinout and connection information for the printer's serial port interface.
Provides the physical dimensions of the GK888t™ printer in inches.
Guide to changing and managing printer settings using ZPL commands for dynamic configuration.
Cross-reference table linking ZPL configuration settings to their corresponding commands.
To Next Page
