Need help?Do you have a question about the Zebra GT800 and is the answer not in the manual?
General| Print technology | Direct thermal / Thermal transfer |
|---|---|
| Maximum resolution | 203 x 203 DPI |
| Maximum printing width | 104 mm |
| Ribbon width | 110 mm |
| Core diameter | 38 mm |
| Media thickness | 0.08 - 0.18 mm |
| Maximum print size | 104 x 991 mm |
| Maximum media length | 991 mm |
| Maximum roll diameter | 127 mm |
| Media thickness (imperial) | 0.003 - 0.007 \ |
| Maximum media length (imperial) | 39 \ |
| Supported paper width (imperial) | 4.09 \ |
| Ethernet LAN | No |
| RS-232 interface | Yes |
| USB 1.1 ports quantity | 1 |
| Connectivity technology | Wired |
| Certification | CE, FCC |
| Internal memory | 8 MB |
| Built-in barcodes | CODABAR (NW-7), Code 128 (A/B/C), Code 39, Code 49, Code 93, Industrial 2/5, Interleaved 2/5, MaxiCode, PDF417, POSTNET, QR Code, UPC-A, UPC-E |
| Built-in processor | 32-bit RISC |
| Page description languages | EPL, EPL2, ZPL II |
| Dimensions (WxDxH) | 197 x 273 x 197 mm |
| Power requirements | 100-240V, 50-60Hz |
| AC adapter output current | 2.5 A |
| AC adapter output voltage | 20 V |
| Storage temperature (T-T) | -40 - 60 °C |
| Operating temperature (T-T) | 40 - 105 °F |
| Storage relative humidity (H-H) | 5 - 95 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Product color | Gray |
Weight and Dimensions| Depth | 273 mm |
|---|---|
| Width | 197 mm |
| Weight | 5000 g |
Provides an overview of the document's structure, contact information, and reference materials.
Details formatting, icons, and advisory words used throughout the user guide.
Lists and illustrates the components included with the printer.
Identifies printer parts and explains basic operations like opening the cover.
Details the various components and features of the printer.
Explains the function of the power switch and darkness control.
Describes the feed button function and status light meanings.
Outlines the two phases of printer setup: hardware and host system.
Details how to connect the printer to a power source safely.
Provides instructions on how to load media rolls into the printer.
Instructions for loading thermal transfer ribbons correctly.
Guidance on installing printer drivers before connecting the printer.
Explains how to connect the printer via various interfaces.
Specifies requirements for data cables, emphasizing shielding.
How to check printer configuration and overview of printing modes.
Details various media types, their compatibility, and handling cautions.
Instructions for reloading media and ribbons when they run out.
How to set print width, quality, and darkness for optimal output.
Explains automatic media sensing and manual calibration procedures.
How to use and adjust the sensor for different media types.
Information on ribbon types, usage, and coating tests.
How to configure and operate the printer without a computer.
Details the function and setup of the label dispenser.
Information on the media cutter option and its usage.
Explains the network print server option and its features.
Describes the Keyboard Display Unit accessory and its functions.
Overview of the ZBI 2.0 programming language for printer customization.
General instructions and supplies for cleaning the printer.
Detailed steps for cleaning the printhead using a cleaning pen.
How to clean the media path, guides, rollers, and sensors.
Instructions for cleaning and potentially replacing the platen roller.
Step-by-step guide for printhead removal and installation.
Explains status light meanings and provides error resolution steps.
Addresses problems like no print or poor print quality and their causes.
Guides on manual calibration, configuration reports, and recalibration.
Procedures for diagnosing data transfer problems between printer and computer.
Explains the different modes accessible via the feed button.
Details the USB interface pinout and requirements.
Wiring diagram for the parallel port connection.
Pinout assignments for the Ethernet network connection.
Wiring details and pin descriptions for serial port connections.
Provides physical dimensions of the printer in inches.
How to dynamically change and manage ZPL printer settings.
Maps configuration report items to ZPL commands.
Information on managing printer memory and obtaining status reports.
To Next Page
