Need help?Do you have a question about the Zebra GT800 Series and is the answer not in the manual?
General| Print Method | Thermal Transfer and Direct Thermal |
|---|---|
| Media Sensors | Reflective and transmissive |
| Power Requirements | 100-240 VAC, 50-60 Hz |
| Humidity | 10% to 90% non-condensing |
| Resolution | 203 dpi |
| Max Print Width | 4.09 inches/104 mm |
| Max Print Speed | 5 inches/127 mm per second |
| Max Print Length | 39 inches/991 mm |
| Memory | 8 MB SDRAM |
| Media Width | 0.75 inches/19.5 mm to 4.49 inches/114 mm |
| Media Length | 0.25 inches/6.5 mm to 39 inches/991 mm |
| Media Thickness | 0.003 inches/0.08 mm to 0.0075 inches/0.20 mm |
| Media Roll Diameter | 5 inches/127 mm |
| Ribbon Length | 244 feet/74 m |
| Ribbon Core | 0.5 inches/12.7 mm |
| Connectivity | USB, Serial, Parallel |
| Programming Languages | ZPL, ZPL II |
| Operating Temperature | 40° F/5° C to 105° F/41° C |
| Storage Temperature | -40° F/-40° C to 140° F/60° C |
| Ribbon Width | 1.33 in./33.8 mm to 4.3 in./110 mm |
Access Getting Started, How-To guides, and User's Guide for printer setup.
Utilize setup utilities, registration, and access product features.
Find maintenance, quick reference, and online resources for support.
Covers advanced network setup procedures for connectivity.
Illustrates the proper connection of the power adapter to the printer.
Details the procedure for turning the printer on using the power switch.
Shows how to connect the main power cord to the adapter.
Explains the choice between 115 VAC and 230 VAC power inputs.
Ensures use of a three-prong plug and IEC 60320-C5 connector with country certification.
Shows media roll specifications and preparation before loading.
Illustrates the initial steps of loading media into the printer.
Illustrates guiding the media through the printer path for printing.
Details specifications for 300m and 74m media rolls, including O.D. and I.D.
Illustrates roll diameter limits and how to measure them.
Shows compatible media roll combinations and required inner diameter (I.D.).
Lists the range of media widths supported by the printer.
Recommends using genuine Zebra supplies for optimal performance.
Visual guide for loading the larger 300m media rolls into the printer.
Visual guide for loading the smaller 74m media rolls into the printer.
Illustrates securing the media roll in place after loading.
Shows the process of feeding the media after it has been loaded.
Connects the printer to a computer using a USB cable.
Connects the printer via serial cable using COM/SER ports.
Connects the printer via parallel cable using LPT ports.
Connects the printer to a network using a LAN cable.
Illustrates the initial steps of feeding labels through the printer.
Shows the final steps of feeding labels through the printer.
Shows initial steps for preparing and loading media rolls.
Illustrates the process of feeding media through the printer.
Shows initial steps for loading fan-fold media into the printer.
Shows final steps for loading fan-fold media into the printer.
Details compatible media widths and their relation to ribbon usage.
Provides guidelines on matching ribbon and media sizes for optimal printing.
States compliance with FCC rules for digital devices.
Confirms compliance with Industry Canada ICES-003 class B requirements.
Lists required electrical specifications for approved power adapters.
Provides contact addresses for Zebra Technologies worldwide offices.
Lists website URLs for product support and information.
To Next Page
