Zebra GT800 - Loading Roll Media

Loading Roll Media
12
P1032729-003 Rev. A GT800™ Thermal Transfer Printer User Guide 9/30/2014
Loading Roll Media
You must use the correct media for the type of printing you require. See Print Operations
on page 37 for more information on identifying different basic media types.
Media Handling
During shipment, handling, or storage, the roll may become dirty or dusty.Whether your
roll media is inside or outside wound, you load it into the printer the same way.
• Remove the outside length of media. Removing the outside length of media avoids
dragging adhesive or dirty media between the printhead and platen.
•
Whether your roll media is inside or outside wound, you load it into the printer the same
way - the print surface faces up.
Open the Printer
Print Side UpRemove Outside Layer