Introduction
What’s in the Box?
8
P1032729-003 Rev. A GT800™ Thermal Transfer Printer User Guide 9/30/2014
Feed Button
• Tap the Feed button once to force the printer to feed one blank label.
• Press the Feed button to take the printer out of a “pause” condition. The printer is put
into “pause” by either a programming command or an error condition. See What the
Status Light is Telling You on page 82 in the Troubleshooting chapter.
• Use the Feed button for printer setup and status (see Feed Button Modes on page 92 in
the Troubleshooting chapter).
Status Light
Located on the top case next to the feed button, the status light functions as a printer
operational indicator (see Status Light Descriptions on page 82).
Closing the printer
1. Lower the top cover.
2. Press down until the cover snaps closed.
To Next Page
Loading...