Zebra GK888t User Manual

99
ZPL Configuration Status to Command Cross-reference
12/23/10 GK888t™ User Guide P1030829-001
ZPL Configuration Status to Command Cross-reference
The Printer Configuration Label, shown below, provides a listing of a majority of the
configurations settings that can be set by ZPL command.
Figure 2 • Configuration Label Printout
Sensor Settings
used for Service
Purposes

Zebra GK888t Specifications

General

Print Method	Thermal Transfer and Direct Thermal
Resolution	203 dpi (8 dots/mm)
Maximum Print Width	4.09 inches (104 mm)
Memory	8 MB Flash
Connectivity	USB, Serial, Parallel
Media Sensors	Reflective and transmissive
Media Handling	Roll-to-roll, fanfold, tag stock
Media Types	tag stock
Ribbon Ratio	1:1
Programming Languages	EPL2, ZPL
Power Requirements	2.5A
Storage Temperature	-40° F to 140° F/-40° C to 60° C
Humidity	20 to 85% non-condensing