Zebra GX430t - Impressions: Transfer Copings and Caps; FRIADENT Transfer Copings; FRIADENT TransferCaps

2928
464304
•
FRIADENT Standard Abutment Screw
4
D 3.0
454305
••••
FRIADENT Standard Abutment Screw
4
461605
•
FRIADENT PickUp Guide
4
D 3.0
451615
••••
FRIADENT PickUp Guide
4
Abutment screws and guide pins are seated with the 1.22 mm
FRIADENT Hex Driver or the 2.0 mm (blade width) FRIADENT Slot
Screwdriver.
FRIADENT TransferCap
20
Multi-Pack
(3 pieces)
451629
–
•
D 3.0
451639 –
•
D 3.4
451649 –
•
D 3.8
451659 –
•
D 4.5
451669 –
•
D 5.5
FRIADENT Transfer Coping (Transfer Technique)
with standard abutment screw
4
(D 3.0 with
abutment screw
4
D 3.0) and TransferCap
20
(D 3.0 – D 5.5)
451620
–
•
D 3.0/GH 3
4
451621 –
•
D 3.0/GH 5
4
451630
–
•
D 3.4/GH 3
4
451631 –
•
D 3.4/GH 5
4
451640
–
•
D 3.8/GH 3
2
451641 –
•
D 3.8/GH 5
2
451650
–
•
D 4.5/GH 3
2
451651 –
•
D 4.5/GH 5
2
451660
–
•
D 5.5/GH 3
2
451661 –
•
D 5.5/GH 5
2
FRIADENT Transfer Coping (PickUp Technique)
with PickUp Guide Pin
4
(D 3.0 with PickUp
Guide Pin
4
D 3.0) and TransferCap
20
(D 3.0 – D 5.5)
451625
–
•
D 3.0/GH 3
4
451622 –
•
D 3.0/GH 5
4
451635
–
•
D 3.4/GH 3
4
451632 –
•
D 3.4/GH 5
4
451645
–
•
D 3.8/GH 3
2
451642 –
•
D 3.8/GH 5
2
451655
–
•
D 4.5/GH 3
2
451652 –
•
D 4.5/GH 5
2
451665
–
•
D 5.5/GH 3
2
451662 –
•
D 5.5/GH 5
2
FRIADENT Transfer Coping (Slim
2
)
451239
–
•
D 3.4
451249 –
•
D 3.8
451259 –
•
D 4.5
The FRIADENT Transfer Coping (Slim) is used with the FRIADENT Gingiva Former
(Slim) to contour soft tissue with limited mesio-distal space.
TRANSFERCAPS
FRIADENT TransferCaps allow greater precision, especially in a rotational axis, when
taking impressions. The implant’s inner geometry is transferred with greater accuracy
resulting in the best possible fit of the superstructure.
3 mm
5 mm
Impressions
Prosthetic Fabrication at Implant Level:
PROD. NO. DESCRIPTION PROD. NO. DESCRIPTION
FRIADENT
®
Prosthetics
for XiVE
®
Implant System