Name: Zebra GX430t
Brand: Zebra
Rating: 4 (1 reviews)

To Next Page

To Previous Page

261115

XiVE Twist Drill, Posterior

D 2.0/L 8–15

261118 XiVE Twist Drill, Anterior

D 2.0/L 8–18

261110 XiVE Round Drill

XiVE Twist Drill, Posterior

261125 –

•

D 3.0/L 8–15

261135 –

•

D 3.4/L 8–15

261145 –

•

D 3.8/L 8–15

261155 –

•

D 4.5/L 8–15

261165 –

•

D 5.5/L 8–15

XiVE Twist Drill, Anterior

261128 –

•

D 3.0/L 8–18

261138 –

•

D 3.4/L 8–18

261148 –

•

D 3.8/L 8–18

261158 –

•

D 4.5/L 8–18

261168 –

•

D 5.5/L 8–18

The XiVE Twist Drills, Posterior and Anterior, are marked with

grooves for clear distinction (see illustration above).

XiVE Twist Drill, Crestal

261120 –

•

D 3.0

261130 –

•

D 3.4

261140 –

•

D 3.8

261150 –

•

D 4.5

261160 –

•

D 5.5

1110

Implant Placement Instruments for Implant Placement

FRIADENT TempBase with TempBase Retaining Screw

461220

–

•

D 3.0

461230 –

•

D 3.4

461240 –

•

D 3.8

461250 –

•

D 4.5

461260 –

•

D 5.5

FRIADENT TempBase Cap

461235

–

•••

D 3.0, D3.4 and D3.8

461255 –

•

D 4.5

461265 –

•

D 5.5

FRIADENT TempBase

Retaining Screw (0.9 mm Hex)

461279

–

•

D 3.0

461280

–

••••

D 3.4 – D 5.5

FRIADENT Implant

Cover Screw

451120

–

•

D 3.0

451130 –

•

D 3.4

451140 –

•

D 3.8

451150 –

•

D 4.5

451160 –

•

D 5.5

FRIADENT TEMPBASE

The FRIADENT TempBase serves as an implant holder, delivery tool or provisional

abutment. It comes standard with the XiVE plus Implant.

XiVE

All XiVE Drills utilize internal irrigation. Replace the drills after approximately

20 uses, or if they become damaged or dull.

Once the appropriate diameter has been reached, the crestal implant design leads

o an internal condensation of bone in the implant site, increasing primary stability.

The crestal twist drill should be used to decrease friction and compressive forces,

especially in dense bone.

In DI and DII bone, pre-tapping for the implant threads is required after crestal

preparation to further reduce friction and compressive force. Therefore, the XiVE

Tap (see page 17) must also be used.

Posterior:

1 Groove

2 Grooves

Temporary Prosthetics

PROD. NO. DESCRIPTION PROD. NO. DESCRIPTION

XiVE

plus

Implant System

Questions and Answers:

Need help?

Do you have a question about the Zebra GX430t and is the answer not in the manual?

Zebra GX430t Specifications

General

Maximum resolution	300 x 300 DPI
Standard interfaces	RS-232, USB 1.1
Optional connectivity	Bluetooth
Internal memory	4 MB
Number of fonts	22
Dimensions (WxDxH)	194 x 254 x 191 mm
Minimum RAM	8 MB
Maximum label width	108 mm
Maximum label length	1 m
Product color	Black
Power requirements	100-240 VAC, 50-60 Hz