5150
XiVE
®
TG Prosthetics
COMPONENTS ARE SELECTED BASED ON YOUR PROSTHETIC TREATMENT PLAN
IMPRESSIONS SINGLE CROWNS BRIDGES OVERDENTURES
XiVE TG
Transfer Impression
Coping
XiVE TG Abutment
Straight or
Angled 15°
XiVE TG Abutment
Straight or
Angled 15°
XiVE TG
Gold, Titanium or
Castable Bar Coping
XiVE TG PickUp
Impression Coping
XiVE TG AuroBase XiVE TG Waxing
Sleeves
251600
•••
XiVE TG Transfer Impression Coping
2
D 3.4 – D 4.5
251605
•••
XiVE TG Transfer Impression Coping (Short)
2
D 3.4 – D 4.5
Short impression copings are used for making the
impression with an existing prosthesis.
251805
•••
XiVE TG PickUp Impression Coping
2
D 3.4 – D 4.5
with PickUp Guide Pin
The XiVE TG PickUp Impression Coping is required for single
units, as it transfers/indexes the square head of the XiVE TG Implant.
The XiVE TG Impression Coping DOES NOT.
251701
•••
XiVE TG PickUp Guide Pin
4
In cases of implant divergences, if a transfer/index of the square head is not
required, please use the FRIADENT MP PickUp Impression Coping D 3.8
(Order no. 461640, see page 38). This impression coping is compatible
with all diameters of XiVE TG Implants.
Impressions
PROD. NO. DESCRIPTION
XiVE
®
TG plus
Implant System
To Next Page
Loading...