Zebra 2844-Z - Connecting the Printer to a DTE Device; Connecting the Printer to a DCE Device

Appendix
Specifications
Physical Specifications
Size TLP 2844-Z 7.8 inches wide / 6.8 inches tall / 9.4 inches long (depth)
200 mm wide / 173 mm tall / 240 mm long (depth)
LP 2844-Z 7.6 inches wide / 6.6 inches tall / 8.5 inches long (depth)
193 mm wide / 167 mm tall / 216 mm long (depth)
Weight TLP 2844-Z 3.6 pounds / 1.6 kilograms
LP 2844-Z 3.0 pounds / 1.4 kilograms
Environmental Guidelines
Operating temp. 40 to 104 degrees Fahrenheit / 5 to 40 degrees Celsius
Operating humidity 10 to 90 percent non-condensing
Storage temp. -40 to 140 degrees Fahrenheit / -40 to 60 degrees Celsius
Storage humidity 5 to 90 percent non-condensing
Electrical Autoranging external power supply
Input: 100-240VAC; 50-60 Hz
Output: 20VDC; 2.5A
Printing Specifications
Print Density 203 dots per inch / 8 dots per millimeter
Print Speed 2 inches / 51 millimeters per second
3 inches / 76 millimeters per second
4 inches / 102 millimeters per second
Print Width 1.0 to 4.09 inches / 25.4 to 104 millimeters
Print Length 0.005 to 22 inches / 0.125 to 559 millimeters
with standard memory
Registration
Tolerance
Horizontal: +/- 0.0591 inches (1.5 millimeters)
Vertical: +/- 0.0393 inches (1.0 millimeters)
FLASH Memory
(user available)
2.75 MB
DRAM Memory
(user available)
4 MB
980410-001 Rev. A 51