Need help?Do you have a question about the Zebra TLP 2824 and is the answer not in the manual?
General| Resolution | 203 dpi |
|---|---|
| Print Method | Direct Thermal |
| Max Print Speed | 4 inches per second |
| Media Sensors | Reflective and transmissive media sensors |
| Connectivity | USB, Serial, Parallel |
| Memory | 4 MB Flash |
| Maximum Print Length | 39 inches |
| Media Width | 1.00 to 2.36 inches |
| Media Length | 0.38 to 39 inches |
| Media Thickness | 0.003 to 0.007 inches |
| Programming Language | ZPL |
| Media Handling | Roll-fed, fanfold, tag stock |
| Max Print Width | 2.2 inches |
Welcomes the user and introduces the printer.
Instructions for opening the printer cover.
Details parts related to the optional peel-off media handling.
Explains the different printing modes (tear-off, peel-off, cutter).
Instructions for adjusting media roll holders based on core width.
Steps to install the ribbon supply roll onto the printer.
Steps to install the ribbon take-up core.
Explains how to turn the printer on and off.
Describes the function of the feed button for advancing media.
Explains the indicator light and its operational meanings.
Specifies requirements for data cables to prevent electrical noise.
Requirements for using the printer's USB connection.
Requirements for using the printer's parallel interface.
Requirements for using the printer's Ethernet connection.
Requirements for using the printer's serial connections.
Information on using the printer with a USB interface.
Notes on connecting and using the printer via a parallel port.
Information on connecting and using the printer with Ethernet.
How to use the 'Y' command to change serial port settings.
Default serial communication settings (baud, parity, etc.).
How to calibrate print width for different media sizes.
Factors affecting print quality and how to adjust speed/density.
Information on thermal printing, print head heat, and media types.
Steps for installing a new ribbon roll.
Procedures for removing and storing partially used ribbon.
Lists available cleaning supplies for the printer.
Step-by-step guide for cleaning printer parts like the print head and platen.
Important notes for cleaning and maintaining the print head.
Tips for cleaning debris from the media path.
Guidelines for using cleaning cards on the platen.
Step-by-step guide for removing the printer's platen.
Step-by-step guide for assembling the printer's platen.
Steps for removing the print head from the thermal-transfer model.
Steps for installing the new print head.
Explains what printer status light colors and patterns mean.
Solutions when the printer media fails to advance.
Reasons and fixes when media moves without printing.
Troubleshooting steps for faded or low-quality prints.
Solutions for printing only partial labels or skipping labels.
Diagnosing issues indicated by amber or red status lights.
Resolving problems with continuous printing between labels.
Solutions for media jamming or blade cutting issues.
Solutions for when no print appears on the label.
Troubleshooting steps for faded or unclear printed images.
Diagnosing and fixing blank vertical lines on labels.
Troubleshooting misaligned printing or printing not starting at the top.
Resolving issues where the printer doesn't recognize sent label formats.
Pinout and wiring for the printer's USB connection.
Pinout and wiring for the printer's parallel interface.
Pinout assignments for the printer's Ethernet RJ-45 connector.
Pinout diagrams for DB-9 and DB-25 serial connections.
Pinout for the printer's alternative RJ-11 serial interface.
To Next Page
