Need help?Do you have a question about the Zebra TLP 3844-Z and is the answer not in the manual?
Welcomes the user and introduces the Zebra TLP 3844-Z printer.
Lists and illustrates the items included in the printer's packaging.
Guides users on how to visually inspect the printer for all parts and their location.
Provides step-by-step instructions on how to open the printer's cover to access the media compartment.
Details the procedure for closing the printer's top cover securely after access.
Instructs users on the steps to take if they discover damage or missing parts upon receiving the printer.
Lists additional documents that may be helpful depending on printer options and usage.
Explains the available printing modes: tear-off, peel-off, and cutter.
Provides instructions on connecting the power supply unit to the printer and an electrical outlet.
Explains the process of loading roll media onto the printer's hangers and adjusting guides.
Details how to place and orient the media roll within the printer's compartment.
Guides users on adjusting the media guides to direct media correctly towards the platen and print head.
Instructions for preparing and installing the ribbon supply roll onto the printer's carriage.
Instructions for installing the ribbon take-up core to manage used ribbon.
Details how to attach the ribbon to the take-up core and tighten it for printing.
Explains the function and operation of the printer's power switch.
Describes the function of the feed button for advancing labels and managing printer states.
Explains the role of the status light as a printer operational indicator.
Specifies requirements for data cables, emphasizing shielded construction for noise reduction.
Details the requirements for using a Universal Serial Bus (USB) interface for high-speed connection.
Outlines the requirements for the IEEE 1284-compliant parallel interface cable.
Describes the Ethernet interface for networking capabilities and obtaining configuration labels.
Details the requirements for the nine-pin "D" type serial interface cable.
Explains the printer's role as a terminal device when using a USB interface.
Details the typical setup for parallel port communication, requiring minimal configuration.
Refers to a separate guide for details on ZebraNet PrintServer II for Ethernet networks.
Explains serial communication setup via autobaud or SC command.
Describes the autobaud synchronization process for automatic parameter matching.
Warns about the hot print head and the need for static-safe procedures during handling.
Provides steps for replacing a used ribbon with a new one, keeping the printer powered on.
Details the procedure for removing and storing a partially used ribbon roll.
Outlines the supplies and procedures for cleaning various parts of the printer.
Emphasizes using new cleaning pens and warns against contaminants for print head care.
Advises on cleaning debris, dust, or crust from media path components using swabs or pens.
Explains how to use cleaning cards to remove debris from the platen roller without damage.
Discusses platen roller cleaning, maintenance, and replacement if performance degrades.
Details the steps for removing the print head and its associated bracket from the carriage.
Provides instructions for installing the new print head, connecting wires, and securing components.
A table and explanation of status LED conditions and corresponding resolutions.
Lists common printer issues and provides troubleshooting steps for each.
Addresses issues where printing doesn't start correctly on the label or misprints occur.
Covers problems where the printer does not recognize a sent label format.
Explains how to print the printer's current configuration for troubleshooting.
Advises on recalibrating the printer when symptoms like skipping labels appear.
Lists the physical dimensions and weight of the printer.
Provides operating and storage conditions for temperature and humidity.
Details the electrical specifications, including the power supply input and output.
Lists technical printing parameters like density, speed, width, and length.
Specifies the horizontal and vertical accuracy tolerances for label registration.
States the amount of available FLASH memory for user data.
States the amount of available DRAM memory for user operations.
Details the pinout and wiring for the printer's USB interface connector.
To Next Page
General