Need help?Do you have a question about the Zebra LP 2824 Plus and is the answer not in the manual?
General| Print technology | Direct thermal |
|---|---|
| Maximum resolution | 203 x 203 DPI |
| Core diameter | 25.4 mm |
| Media thickness | 0.08 - 0.18 mm |
| Maximum media length | 991 mm |
| Maximum roll diameter | 127 mm |
| Media thickness (imperial) | 0.003 - 0.007 \ |
| Maximum media length (imperial) | 39 \ |
| Standard interfaces | Ethernet |
| USB 1.1 ports quantity | 1 |
| Connectivity technology | Wired |
| Dimensions (WxDxH) | 111 x 216 x 171 mm |
| Flash memory | 4 MB |
| Certification | -FCC, -VCCI, -C-TICK, -UL, -NOM, -CE, -IRAM, -AAMI. |
| Internal memory | 8 MB |
| Built-in barcodes | Code 39, Code 49, Code 93, MaxiCode, PDF417, Postnet, QR Code, UPC-A, UPC-E |
| Page description languages | EPL, EPL2, ZPL, ZPL II |
| Storage temperature (T-T) | -40 - 140 °F |
| Operating temperature (T-T) | 5 - 41 °C |
| Storage relative humidity (H-H) | 5 - 95 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Power requirements | 100 - 240 VAC, 50 - 60 Hz |
| Package weight | 2400 g |
Weight and Dimensions| Weight | 1200 g |
|---|
Details regulatory compliance for the device.
Provides guidance on product disposal and recycling.
Explains document purpose, structure, and conventions.
Lists contact information for technical assistance and service.
Describes the printer's capabilities and model.
Provides steps for unpacking and checking for damage.
Illustrates and labels the printer's physical parts.
Explains the power switch and reset button functions.
Step-by-step instructions for connecting power.
Guide to properly load media rolls.
Procedure to print a status label for verification.
Details on interface connections (USB, Serial, Parallel).
How to print and interpret status labels.
Describes various media types and their use.
Covers print width and quality settings.
Details automatic media detection.
Describes how to use the label dispenser.
Details the media cutter accessory and its usage.
Explains network connectivity features.
Covers keyboard display unit options.
Details cleaning the printhead, platen roller, and media path.
Step-by-step guide for replacing the printer's printhead.
Interprets status light codes and offers solutions.
Addresses common issues affecting print appearance.
Steps for calibrating media sensors.
Guides for troubleshooting data transfer errors.
Details USB connection pinouts and requirements.
Explains parallel port wiring and pin assignments.
Describes Ethernet port pinouts and cabling.
Details serial port pinouts and cable types.
To Next Page
