Need help?Do you have a question about the Zebra 2746e and is the answer not in the manual?
Open the shipping carton and remove the printer and its accessories.
Familiarize yourself with the printer's internal components and external features.
Details on the printer's power switch, buttons, LEDs, and mode switch.
Step-by-step guide for attaching power and interface cables to the printer.
Instructions for loading various types of media, including steps for opening the print head and guides.
Guidance on preparing the media, including removing loose labels and detaching tag stock ends.
Procedure to automatically set media sensitivity, form, and gap lengths for optimal sensing.
How to configure and use the printer to dispense single peeled labels.
Instructions for using the rewind function to rewind partial label rolls.
Steps for installing an empty ribbon core and a transfer ribbon roll.
Introduces the common problems troubleshooting table for initial reference.
Details on the printer's serial port default configuration settings.
Diagrams showing cable wiring for DB-9 to DB-9 and DB-25 to DB-9 serial connections.
Pinout information for connecting the printer via USB interface.
Diagrams illustrating cable wiring for Centronics parallel interface connections.
Explanation of printer configuration settings stored in flash memory and their parameters.
Overview of direct thermal and thermal transfer media types supported by the printer.
Description of the transmissive, reflective, and ribbon out sensors used for media detection.
Guidance on adjusting the printer's sensor for optimal detection of gaps, marks, or holes.
Explanation of how the printer detects the top of a label or tag using gap or black mark sensing.
Details on how the transmissive sensor uses gaps between labels for sensing.
Information on using the reflective sensor to detect black marks on media backing.
Illustrates sensor adjustment range and required dimensions for index holes/notches on tag stock.
Instructions for cleaning the printer's media path, including safety warnings.
Step-by-step guide for cleaning the printer's print head using a cleaning pen.
Factors affecting print head life and how proper maintenance extends it.
Key factors that reduce print head life, including touching, cleaning, media, ribbon, temperature, and speed.
General rules for using the cutter, including what not to cut and command references.
Technical details of the cutter option, including warranty, MTBF, media compatibility, and dimensions.
Instructions for safely clearing jams from the media cutter.
Procedure for attaching and removing the optional cutter from the printer.
Overview of commands used to access and control print odometer data.
Command for customizing print head life reminder thresholds, frequency, and messages.
Command to deactivate the print head life reminder reporting feature.
Command to activate the print head life reminder reporting feature.
Command to print or report the printer's print head history.
Command to read current print head usage and total printer distance.
Command to print or report the status and settings for the print head life reminder.
To Next Page
General