Zebra 2746e - USB Interface Cable Wiring

USB Interface
Cable Wiring
The figure below displays the cable wiring
required to use the printer's USB interface.
For printer supported operating systems and
USB drivers, see the software and documenta
-
tion CD or visit the Zebra printer web site at:
http://www.zebra.com
For information on the USB interface go to the
USB web site, at:
http://www.usb.org
Troubleshooting
980412-001 Rev.A A-5
1
2
3
4
USB
Connector
Pin Signal
1 Vbus - N/C
2D-
3D+
4 Ground
Shell
Shield /
Drain Wire