Zebra 2746e - URL Command - Read Print Odometers

URL Command - Read Print Odometers
Description Use this command to print or report (via the se
-
rial or USB interface) latest active print odome
-
ter data stored in printer memory. Report
printer usage for one or both of the following:
•
The current distance printed by the presently
installed print head.
•
The total distance printed by the printer.
Syntax
URL[p
1
p
2
p
3
]
Parameters Parameters are optional and maybe entered
and any order.
p
1
= Report Method (device)
p = Printer
s = Serial port or USB interface
(default)
Sends information back to the host via
the serial port and the last active bi-di-
rectional interface.
p
2
= Units
m = Millimeters (mm)
i = Inches (”)
(default)
p
3
= Read Meter
h = Head Life (distance)
for the presently installed print head
t = Total Print Distance
None = Default - Prints both Head Life
and Total Print Distance report data
strings. Do not use both the p
3
parame
-
ters, h and t.
980412-001 Rev.A D-7
HEAD usage = XXX,XXX,XXX " [XXX days]
TOTAL usage = XXX,XXX,XXX " [XXX days]
Example
(default)