Cleaning the
Print Head
As you use your printer, the print head may be
-
come contaminated resulting in poor print
quality. Whenever new labels are loaded into
the printer, the print head should be cleaned
with a cleaning pen.
Step 1 Open the printer and the print head carriage.
Step 2 Gently rub the cleaning pen across the amber
area of the print head.
Allow the print head to dry for 1 minute before
loading labels.
Do Not Clean the Print Head with sharp
objects! Only used approved cleaning
materials.
Operator Maintenance
B-2 980412-001 Rev.A
To Next Page
Loading...
