Controls &
Indicators
Power Switch
OFF
0 = Off
ON
1 = On
Button Function
PAUSE
Press Once - Halt batch printing.
Press Second Time - Resume batch
printing operation.
FEED
Press Once - Feed one label or “form”.
Press & Hold - Feed a single label, stop,
feed a single label, stop, and so on until
the FEED button is released.
CANCEL
Press Once - resets and terminates any
print operation in progress.
Indicator LEDs
Condition Report
POWER ERROR
On Solid OFF
Power On
Flashing OFF
Pause
OFF Flashing
Print head open
OFF On Solid
1) Hardware Error
2) Command Error
3) Media or Ribbon Out
Label Mode Switch
Mode Description
Peel
Print one label and pause. Remove label.
Prints next label. Repeats until print oper
-
ation is completed. Use label liner
rewinder to peel the liner from the label.
Batch
Standard operation - Prints one or more
labels until the batch form (label) print
operation is complete.
Installation & Operation
4 980412-001 Rev.A
PEEL
BATCH
O
O
Power
Indicator
Error
Indicator
To Next Page
Loading...
