Introduction
This section describes what you get in your shipping box and provides an
overview of printer parts. This section also has procedures that describe
how to open and close the printer and report any problems.
Hello!
Thank you for choosing a Zebra
®
2844-Z™ printer, a high-quality
on-demand printer manufactured by the industry leader in quality, service,
and value—Zebra Technologies Corporation. For over 25 years, Zebra
Technologies Corporation has provided customers with the highest caliber
of products and support.
There are two models of printer:
■
LP—The LP 2844-Z printer provides direct-thermal printing.
■
TLP—The TLP 2844-Z printer provides thermal-transfer printing
(which uses ribbon) and direct-thermal printing.
This manual provides all of the information you will need to operate your
printer on a daily basis. To create label formats, refer to the ZPL II
Programming Guide (part # 46530L). This guide is available by contacting
your distributor or Zebra Technologies Corporation.
NOTE: Many printer settings may also be controlled by your printer’s
driver or label preparation software. Refer to the driver or
software documentation for more information.
Zebra 2844-Z printers, when connected to a host computer, function as a
complete system for printing labels, tickets, and tags.
980410-001 Rev. A 1
To Next Page
Loading...
Need help?
General
