Zebra 2844-Z User Manual

Reporting Damage
If you discover damage or missing parts:
■
Immediately notify and file a damage report with the shipping company.
Zebra Technologies Corporation is not responsible for any damage
incurred during shipment of the printer and will not cover the repair of
this damage under its warranty policy.
■
Keep the carton and all packing material for inspection.
■
Notify the authorized reseller
Related Documentation
Depending on the options you have ordered or choose to use with your new
printer, you will find the following documents helpful:
■
ZPL II® Programming Guide (customer order number 46530L)
■
Universal Serial Bus Specification available from the USB
Implementation Forum.
■
ZebraNet® PrintServer II
TM
for Ethernet Networks Installation and
Operation Guide (customer order number 46716L)
6 980410-001 Rev. A

Zebra 2844-Z Specifications

General

Resolution	203 dpi (8 dots/mm)
Print Method	Direct Thermal
Print Width	4.09 inches (104 mm)
Maximum Print Length	39 inches (991 mm)
Print Speed	4 inches per second (102 mm/s)
Memory	8 MB SDRAM
Connectivity	Serial, Parallel, USB
Media Sensors	Reflective and Transmissive
Interface	RS-232, Parallel, USB, Ethernet (optional)
Power Requirements	100-240 VAC, 50/60 Hz