Need help?Do you have a question about the Zebra Desktop Printer and is the answer not in the manual?
General| Print Method | Direct Thermal |
|---|---|
| Resolution | 203 dpi |
| Maximum Print Width | 4.09 inches (104 mm) |
| Media Sensors | Reflective and Transmissive |
| Communication Methods | USB |
| Programming Languages | ZPL |
| Supported Media Types | Labels, Tags |
| Media Width | 1.0 inch (25.4 mm) to 4.33 inches (110 mm) |
| Media Thickness | 0.003 inches (0.076 mm) to 0.008 inches (0.2 mm) |
Welcomes the user to the Zebra LP 2844 printer and outlines the manual's purpose.
Lists the components included in the printer's packaging.
Guides users on checking the printer's external parts for completeness and condition.
Provides instructions on how to open the printer to access the media compartment.
Details the steps for properly closing the printer's top cover.
Instructs users on procedures to follow if damage or missing parts are discovered.
Lists other helpful documents for printer operation and setup.
Explains the different printing modes available for the printer.
Detailed instructions for connecting the printer's power adapter and cord.
Guides on properly loading roll media into the printer.
Step-by-step process for seating the media roll.
Instructions for adjusting media guides for optimal alignment.
Overview of the printer's physical controls.
Explains the function and operation of the power switch.
Describes the feed button's role in feeding media and printer status.
Explains the meaning of the printer's status light indications.
Procedure to measure and calibrate media length for accurate printing.
General guidance on connecting the printer to a computer.
Specifies requirements for data cables used with the printer.
Details specifications for connecting via USB interface.
Details specifications for connecting via parallel interface.
Details specifications for connecting via Ethernet interface.
Details specifications for connecting via serial interface.
Discusses how the printer communicates via different interfaces.
Information on USB communication for the printer.
Information on parallel port communication for the printer.
Details on using the Ethernet PrintServer for communication.
Information on serial port communication for the printer.
How to calibrate and set the print width for different media.
Methods to optimize print darkness and quality.
Explains the thermal printing process and safety precautions regarding the print head.
Instructions for reloading media when labels run out, emphasizing power status.
Guides on using the optional peel-mode dispenser for single label presentation.
Instructions for setting up media hangers and guides for fan-fold media.
How to use the optional cutter feature and clear jams.
Comprehensive guide to cleaning printer parts like print head, platen, tear bar, and exterior.
Specific instructions for cleaning and maintaining the platen roller.
Warning against using lubricants on the printer due to potential damage.
Step-by-step procedure for removing and reinstalling the printer's platen.
Instructions and precautions for replacing the printer's print head.
Explains what the different status light colors and patterns signify.
Solutions for common issues like media not advancing or poor print quality.
Troubleshooting for problems with label dispenser and cutter operation.
Addresses problems like no print, poor image, or missing lines.
Solutions for printing not starting at the top or unrecognized label formats.
Procedure to manually calibrate media length for accurate sensing.
Steps to diagnose data transfer problems between printer and computer.
Table detailing feed button actions based on printer condition.
Shows the cable wiring for the printer's USB interface.
Displays the cable wiring for the printer's Centronics parallel interface.
Provides pinout assignments for the RJ-45 Ethernet connector.
Details the wiring for the printer's RS-232 serial port.
To Next Page
