Zebra Desktop Printer User Manual

Reporting Damage
If you discover damage or missing parts:
■
Immediately notify and file a damage report with the shipping company.
The manufacturer is not responsible for any damage incurred during
shipment of the printer and will not cover the repair of this damage
under its warranty policy.
■
Keep the carton and all packing material for inspection.
■
Notify the authorized reseller
Related Documentation
Depending on the options you have ordered or choose to use with your new
printer, you will find the following documents helpful:
■
EPL2® Programmer's Manual—Programming for Page Mode Printing
■
Line Mode Programmer's Manual and the notice YOUR NEW PRINTER
and Its Printing Modes describing the line mode (EPL1) capability of
your printer's firmware.
■
ZebraNet® PrintServer II
TM
for Ethernet Networks Installation and
Operation Guide
■
Universal Serial Bus Specification available from the USB
Implementation Forum
6 980483-001A

Zebra Desktop Printer Specifications

General

Print Method	Direct Thermal
Resolution	203 dpi
Maximum Print Width	4.09 inches (104 mm)
Media Sensors	Reflective and Transmissive
Communication Methods	USB
Programming Languages	ZPL
Supported Media Types	Labels, Tags
Media Width	1.0 inch (25.4 mm) to 4.33 inches (110 mm)
Media Thickness	0.003 inches (0.076 mm) to 0.008 inches (0.2 mm)