Zebra Desktop Printer User Manual

Getting Started
This section describes how to set up your printer for the first time and use
the most common operating procedures for loading media in tear-off mode.
Modes of Printing
You can operate this printer in different modes:
■
Standard tear-off mode allows you to tear off each label (or a strip of
labels) after it is printed.
■
In optional peel-off mode, the backing material is peeled away from the
label as it is printed. After this label is removed, the next one is printed.
■
In optional liner-free mode, labels have no backing. This option is only
available with a special platen.
■
In optional cutter mode, an attached unit cuts through the media.
The printer typically uses roll media, but you can use fan-fold or other
continuous media as well.
For procedures to use optional modes and features, refer to the Operation
and Options section.
980483-001A 7

Zebra Desktop Printer Specifications

General

Print Method	Direct Thermal
Resolution	203 dpi
Maximum Print Width	4.09 inches (104 mm)
Media Sensors	Reflective and Transmissive
Communication Methods	USB
Programming Languages	ZPL
Supported Media Types	Labels, Tags
Media Width	1.0 inch (25.4 mm) to 4.33 inches (110 mm)
Media Thickness	0.003 inches (0.076 mm) to 0.008 inches (0.2 mm)