Name: Zebra Desktop Printer
Brand: Zebra
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Adjusting the Guides

The adjustable guides direct the media

toward the platen and print head.

1. Open the media guides by turning the

guide adjuster knob to the rear.

2. Thread the media through the guides.

3. Close the media guides by turning the

guide adjuster knob to the front. They

should just touch, but not restrict, the

edges of the media.

4. Close the top cover. Remember that

you need to release the cover lock,

lower the top cover, and press down

until the latches snap into place.

10 980483-001A

Questions and Answers:

Need help?

Do you have a question about the Zebra Desktop Printer and is the answer not in the manual?

Zebra Desktop Printer Specifications

General

Print Method	Direct Thermal
Resolution	203 dpi
Maximum Print Width	4.09 inches (104 mm)
Media Sensors	Reflective and Transmissive
Communication Methods	USB
Programming Languages	ZPL
Supported Media Types	Labels, Tags
Media Width	1.0 inch (25.4 mm) to 4.33 inches (110 mm)
Media Thickness	0.003 inches (0.076 mm) to 0.008 inches (0.2 mm)