Specifications
General Printer Specifications
184
P1089083-001 ZT410 RFID Printer for Silverline Media User Guide 10/7/16
General Printer Specifications
Height 12.8 in.(325 mm)
Width 10.7 in. (272 mm)
Depth 19.7 in. (500 mm)
Weight 36 lb (16 kg)
Electrical 90–265 VAC, 48-62 Hz
Power consumption
Printing PAUSE test at slowest speed
118.7 W
Power consumption
Printer idle
<7 W
Fuses 5A
Temperature Operating Thermal Transfer: 41° to 104°F (5° to 40°C)
Direct Thermal: 32° to 104°F (0° to 40°C)
Storage –40° to 140°F (–40° to 60°C)
Relative Humidity Operating 20% to 85%, non-condensing
Storage 5% to 85%, non-condensing
Communication Interface
Specifications
Standard Bluetooth
®
version 2.1
Limitations and Requirements
Many mobile devices can communicate with the printer
within a 10-foot radius of the printer.
Connections and Configuration
Refer to the Zebra Bluetooth User Guide for specific
instructions for configuring your printer to use a
Bluetooth interface. A copy of this manual is available
at http://www.zebra.com/manuals.
USB host port
See Using the USB Host Port and NFC Capabilities
on page 167 for more information.
Limitations and Requirements
Only one device can be plugged into the printer’s USB
host port. You cannot use a second device by plugging it
into a USB port on the first device, nor can you use an
adaptor to split the USB host port on the printer to
accept more than one device.
Connections and Configuration
No additional configuration is necessary.
(Continued on next page.)
To Next Page
Loading...