Using the USB Host Port and NFC Capability
USB Host
174
P1089083-001 ZT410 RFID Printer for Silverline Media User Guide 10/7/16
Exercise 2: Print a Label Format from a USB Flash Drive
The Print USB File option allows you to print files from a USB mass storage device, such as a
USB Flash drive. Only printable files (
.ZPL and .XML) may be printed from the USB mass
storage device, and the files must be located at the root level, not in a directory.
1. Copy the following files to your USB Flash drive:
• File 4: USBSTOREDFILE.ZPL
• File 5: VLS_BONKGRF.ZPL
• File 6: VLS_EIFFEL.ZPL
2. Insert the USB Flash drive into the USB host port on the front of your printer.
3. On the printer’s control panel, press the LEFT SELECT button (below the home icon )
to access the printer’s Home Menu.
4. Use the ARROW buttons to scroll to the Tools menu.
5. Press OK.
6. Use the ARROW buttons to scroll to PRINT USB FILE.
The printer loads any executable files and processes them. The available files are listed.
SELECT ALL is available to print all files on the USB Flash drive.
7. If necessary, use the up and down arrow to select USBSTOREDFILE.zpl.
8. Press the RIGHT SELECT button to select PRINT.
The label prints.
To Next Page
Loading...