Printer Configuration and Adjustment
Adjust the Printhead Pressure
126
P1089083-001 ZT410 RFID Printer for Silverline Media User Guide 10/7/16
Adjust the Printhead Pressure
You may need to adjust printhead pressure if printing is too light on one side, if you use thick
media, or if the media drifts from side to side during printing. Use the lowest printhead
pressure necessary to produce good print quality.
See Figure 14. The printhead pressure adjustment dials have setting marks from 1 to 4.
Figure 14 • Printhead Pressure Adjustment Dials
See Table 12. Begin with the following pressure settings, based on your printer and media
width, and make adjustments as necessary.
1
Inside dial
2
Outside dial
Table 12 • Toggle Pressure Settings
Tag Inside Dial Setting Outside Dial Setting
Micro 3 2
Classic 3 3
Slim 3 3
Blade 3 2
To Next Page
Loading...