183
Specifications
Ribbon Specifications
10/7/16 ZT410 RFID Printer for Silverline Media User Guide P1089083-001
Ribbon Specifications
Recommended ribbon for use with Silverline labels is 5095 Performance Resin Ribbon.
Ribbon width* Minimum 2 in.** (51 mm**)
Maximum 4.33 in. (110 mm)
Maximum ribbon length 1476 ft (450 m)
Ribbon core inside diameter 1 in. (25 mm)
Ribbon roll outside diameter 3.2 in. (81.3 mm)
* Zebra recommends using ribbon that is at least as wide as the media to protect the printhead from wear.
** Depending on your application, you may be able to use ribbon narrower than 2 in. (51 mm), as long as the ribbon is wider
than the media being used. To use a narrower ribbon, test the ribbon’s performance with your media to assure that you get the
desired results.
To Next Page
Loading...