Zebra Silverline ZT410 - CANCEL Self Test

157
Troubleshooting
Printer Diagnostics—CANCEL Self Test
10/7/16 ZT410 RFID Printer for Silverline Media User Guide P1089083-001
CANCEL Self Test
The CANCEL self test prints a printer configuration label and a network configuration label.
For other ways to print these labels, see Print Information on page 84.
To perform the CANCEL Self Test, complete these steps:
1. Turn off (O) the printer.
2. Press and hold CANCEL while turning on (I) the printer. Hold CANCEL until the first
control panel light turns off.
The printer prints a printer configuration label (Figure 15) and then a network
configuration label (Figure 16).
Important • Performing this self test will use a number of Silverline tags. To avoid printing,
use send the ZPL string
^XA^HH^XZ to return the configuration label information to the host.
Figure 15 • Sample Printer
Configuration Label
Figure 16 • Sample Network
Configuration Label