Zebra Silverline ZT410 - RFID Settings

Printer Configuration and Adjustment
Adjust Printer Settings—RFID Settings
104
P1089083-001 ZT410 RFID Printer for Silverline Media User Guide 10/7/16
RFID Settings
Table 7 • RFID Settings
RFID COUNTRY CODE
RFID Country
Code
View the RFID country code.
Note • A prompt for the country code appears only on some printers the first
time that they are powered up, depending on the world region to which the
printers were shipped. Select the appropriate country to access the printer’s
RFID features.
User menu item:
Main Menu >
RFID
SGD command used:
rfid.country_code
RFID STATUS
RFID Status Display the status of the RFID subsystem of the printer.
User menu item:
Main Menu >
RFID
Related ZPL command(s):
^HL or ~HL
SGD command used:
rfid.error.response
RFID CALIBRATE
RFID Tag
Calibration
Initiate tag calibration for RFID media. (Not the same as media and ribbon calibration.)
User menu item:
Main Menu >
RFID
Related ZPL command(s):
^HR
SGD command used:
rfid.tag.calibrate