Zebra Silverline ZT410 - Page 103

103
Printer Configuration and Adjustment
Adjust Printer Settings—Network Settings
10/7/16 ZT410 RFID Printer for Silverline Media User Guide P1089083-001
CHANNEL
Channel View the wireless channel being used when the wireless network is active and
authenticated.
User menu item:
Main Menu >
NETWORK
SGD command used:
wlan.channel
Printer web page: View and Modify Printer Settings >
Network Communications Setup > Wireless Setup
SIGNAL
Signal View the wireless signal strength when the wireless network is active and authenticated.
User menu item:
Main Menu >
NETWORK
SGD command used:
wlan.signal_strength
Printer web page: View and Modify Printer Settings >
Network Communications Setup > Wireless Setup
RESET NETWORK
Reset Network This option resets the wired or wireless print server. You must reset the print server to
allow any changes to the network settings to take effect.
User menu item:
Main Menu >
NETWORK
Related ZPL command(s):
~WR
SGD command used:
device.reset
Printer web page: Print Server Settings > Reset Print Server
Table 6 • Network Settings (Continued)